LONG-TERM OUTCOMES OF IMPLANT PLACEMENT VERSUS TOOTH PRESERVATION IN PERIODONTALLY COMPROMISED TEETH MAY BE COMPARABLE.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Sarafidou K, Lazaridi I, Gotsis S, Kirmanidou Y, Vasilaki D, Hirayama H, Michalakis K. Tooth preservation vs. extraction and implant placement in periodontally compromised patients: A systematic review and analysis of studies. J Prosthodont. 2022 Oct;31(8):e87-e99. doi:10.1111/jopr.13560. Epub 2022 Aug 2. PMID: 35794083 SOURCE OF FUNDING: No external funding was received for this research. TYPE OF STUDY/DESIGN: Systematic review (without meta-analysis).

Air powder waterjet technology using erythritol or glycine powders in periodontal or peri-implant prophylaxis and therapy: A consensus report of an expert meeting.

OBJECTIVES: To attain a collective expert opinion on the use of air powder waterjet technology (APWT) with erythritol and glycine powders in the prophylaxis and therapy of periodontal and peri-implant diseases. MATERIAL AND METHODS: In the first step, a modified one-round online Delphi survey including 44 five-point Likert scale questions was conducted among a group of 10 expert clinicians and researchers with thorough knowledge and experience in this topic. In the second step, the single questions and the survey results were discussed during a meeting, and consensus statements were formulated, respectively. RESULTS: An agreement was reached on most items, especially opinions supporting glycine and erythritol powders as favorable with respect to efficiency, safety, and comfort. More scientific evidence is needed to support the improvement in clinical attachment on teeth and implants, especially when APWT with erythritol is used. In addition, APWT needs more long-term evaluation and studies in terms of microbiome/microbiological effects as well as effects on the inflammatory response on natural teeth and implants, also in light of a guided biofilm therapy concept. CONCLUSIONS: In line with the expert opinions and supported by the evidence, it was concluded that the use of APWT with erythritol and glycine powders in nonsurgical periodontal and peri-implant therapy and prophylaxis is patient compliant and efficient.

Bacterial contamination of air and surfaces during dental procedures-An experimental pilot study using Staphylococcus aureus.

OBJECTIVE: The oral cavity contains numerous microorganisms, including antimicrobial-resistant bacteria. These microorganisms can be transmitted via respiratory particles from patients to healthcare providers and vice versa during dental care. We evaluated the spread of Staphylococcus aureus during standardized dental procedures using different scaling devices and rinsing solutions. METHODS: During systematic therapy for dental biofilm removal (guided biofilm therapy), using an airflow or ultrasound device to a model simulation head. Staphylococcus aureus suspension was injected into the mouth of the model to mimic saliva. Different suction devices (conventional saliva ejector or a prototype) and rising solutions (water or chlorhexidine) were used. To assess contamination with S. aureus, an air-sampling device was placed near the oral cavity and samples of surface areas were collected. RESULTS: S. aureus was only detected by air sampling when the conventional saliva ejector with airflow was used. No growth was observed during treatments with the ultrasonic piezo instrument or the prototype suction device. Notably, a rinsing solution of chlorhexidine digluconate decreased the bacterial load compared to water. Surface contamination was rarely detected (1 of 120 samples). CONCLUSIONS: Although our findings indicate potential airborne bacterial transmission during routine prophylactic procedures, specific treatment options during biofilm removal appear to reduce air contamination. These options include ultrasonic piezo devices or the prototype suction device. The use of chlorhexidine reduced the CFU counts of S. aureus detected by air sampling. Surface contamination during dental procedures was a rare occurrence.

Properties of three collagen scaffolds in comparison with native connective tissue: an in-vitro study.

PURPOSE: To evaluate collagen scaffolds (CS) in terms of their in vitro resorption behavior, surface structure, swelling behavior, and mechanical properties in physiologically simulated environments, compared with porcine native connective tissue. MATERIALS AND METHODS: Three test materials-one porcine collagen matrix (p-CM), two acellular dermal matrices (porcine = p-ADM, allogenic = a-ADM)-and porcine native connective tissue (p-CTG) as a control material were examined for resorption in four solutions using a high-precision scale. The solutions were artificial saliva (AS) and simulated body fluid (SBF), both with and without collagenase (0.5 U/ml at 37 °C). In addition, the surface structures of CS were analyzed using a scanning electron microscope (SEM) before and after exposure to AS or SBF. The swelling behavior of CS was evaluated by measuring volume change and liquid absorption capacity in phosphate-buffered saline (PBS). Finally, the mechanical properties of CS and p-CTG were investigated using cyclic compression testing in PBS. RESULTS: Solutions containing collagenase demonstrated high resorption rates with significant differences (p < 0.04) between the tested materials after 4 h, 8 h and 24 h, ranging from 54.1 to 100% after 24 h. SEM images revealed cross-linked collagen structures in all untreated specimens. Unlike a-ADM, the scaffolds of p-CM and p-ADM displayed a flake-like structure. The swelling ratio and fluid absorption capacity per area ranged from 13.4 to 25.5% among the test materials and showed following pattern: p-CM > a-ADM > p-ADM. P-CM exhibited higher elastic properties than p-ADM, whereas a-ADM, like p-CTG, were barely compressible and lost structural integrity under increasing pressure. CONCLUSIONS AND CLINICAL IMPLICATIONS: Collagen scaffolds vary significantly in their physical properties, such as resorption and swelling behavior and elastic properties, depending on their microstructure and composition. When clinically applied, these differences should be taken into consideration to achieve the desired outcomes.

Description of a new laboratory evaluation method of interdental brush abrasion as a clinical hazard.

OBJECTIVES: To simulate the abrasive potential of an interdental brush when applied with toothpastes and prophylactic gels/solutions in a novel laboratory brushing simulation set-up. METHODS: A brushing device was customized to treat dentin samples mimicking a simplified interdental space with an interdental brush (ISO 2). The brushing, that is, 7200 strokes for 1 h, was performed with artificial saliva (control), a povidone-iodine solution, and slurries of chlorhexidine and fluoride gels as well as three toothpastes with different RDA values ranging from 29 to 100, respectively. The loss of dentin was profilometrically assessed and compared with ANOVA and Fishers LSD. RESULTS: While artificial saliva as control, the solution and the gel slurries showed no measurable dentin loss, toothpastes resulted in a measurable linear surface damage with respect to the actual intrinsic RDA values and ranged from 12.6 to 26.5 µm (p < 0.001). CONCLUSIONS: Any interdental cleaning product should be tailored and carefully instructed. Any over- and misuse should be avoided, which applies especially to the use of interdental brushes in combination with abrasive toothpastes.

A conceptual review on reconstructive peri-implantitis therapy: Challenges and opportunities.

OBJECTIVES: The current strategies to reconstruct lost peri-implant tissues due to the disease have been largely unpredictable. The aim of this conceptual review is to discuss relevant biological and biomechanical challenges of applying reconstructive means to treat peri-implantitis. Additionally, opportunities to improve treatment predictability are presented. MATERIAL AND METHODS: A narrative review was conducted to fulfill the aim. RESULTS: The four interrelated negative conditions hampering effective reconstruction are: inferior tissue perfusion, unfavorable bone topography, ineffective surface treatment, and unstable wound. First, peri-implant tissues resemble scars with reduced cellularity and vascularity, coupled with the absence of the periodontal ligament plexuses and the avascular implant and biomaterials, maintaining primary closure is a challenge, which is critical for regeneration. Second, defect morphology and bone topography surrounding implants determine the reconstructive potential. Unfortunately, noncontained defects are frequently encountered, with a combination of suprabony (horizontal bone loss) and infrabony (vertical usually involving circumferential bone loss) defects. Third, current attempts for implant surface decontamination are insufficient due to inaccessible macrostructure and rough surfaces in the micro-scale. Histologic evaluation has shown bacteria aggregation and calcified deposits around implants. Lastly, wound stability is difficult to achieve due to inherent soft tissue biomechanical quality and quantity deficiencies and mobile bone particulates. Opportunities to tackle the abovementioned challenges include the use of novel imaging technologies, such as high-frequency dental ultrasound and laser speckle imaging to evaluate tissue perfusion, soft tissue quality/quantity, and bone topography pre-surgically. The use of the operating microscope could allow better visualization and removal of etiologic factors. Strategies to improve soft tissue quality may include preoperative control of soft tissue inflammation and the potential use of biologics. Methods such as fixation to stabilize the biomaterials could be beneficial. CONCLUSIONS: A more nuanced understanding of the current challenges and opportunities can lead to more effective preoperative and postoperative care protocols, ultimately improving the success rate of reconstructive procedures.

[Direct adhesive reconstructions for restoration of posterior teeth with erosive tooth wear]. / Direkte Restaurationstechnik im Seitenzahnbereich zur Versorgung von erosionsbedingtem Zahnhartsubstanzverlust.

The restorative treatment of dental hard tissue loss, e.g., due to erosion, and the rehabilitation of the original vertical bite dimension confronts the dentist with problems when implementing the therapy. Traditionally, this therapy is conducted with laboratory-fabricated workpieces made of ceramics which usually require a preparation of the remaining tooth substance and also causes high costs for the patient. Therefore, alternative methods should be considered. This article presents the use of direct adhesive composite restorations as a way of reconstructing a dentition severely altered by erosion. To reconstruct the occlusal surfaces, transfer splints are used that are made on the basis of individual wax-up models. The procedure described is a well-researched and proven method for restoring teeth with erosion-related loss of hard tooth substance. As with all new procedures, there will be a certain learning curve for the practical dentist after which high-quality restorations can be implemented with this technique.

Efficient cleaning of a macro-structured micro-rough dental implant shoulder with a new coronal vertical groove design: A technical note.

This evaluation assessed the influence of a new implant shoulder design on cleanability using a now established in-vitro study model. Eight test (Botticelli, Di Meliora AG, Basel, Switzerland) and eight control implants (T3 Osseotite, ZimVie, Winterthur, Switzerland), were embedded in standardized defects in simulated bone. The implant surfaces were painted to be visually distinguishable and debrided with ultrasonic instruments (US) and an air powder waterjet device (AIR). Uncleaned implants served as positive controls. After the standardized cleaning, the implants were photographed and divided into three zones (upper marginal shoulder zone (A); lower marginal shoulder zone (B); fully threaded sub-shoulder zone (C)), and analyzed with an image processing software. On test implants, AIR was almost 100% efficacious compared to 80-90% with US, in both upper zones (A/B). In control implants, results of both AIR and US were almost 100% in zone A, but only 55-75% in zone B. In both implants, AIR showed statistically significant higher efficacy than US (P<0.05). Within the limitations of the present in-vitro model, a new macro-structured micro-rough dental implant shoulder with a new coronal vertical groove design shows similar cleanability in comparison to a smooth and machined surface.

Dentin Loss and Surface Alteration Through Chemical and Chemomechanical Challenge after Initial Root Instrumentation.

PURPOSE: To assess the root surface roughness and substance loss induced by chemical and chemomechanical challenges on root surfaces pretreated with ultrasonic instrumentation, a hand scaler, or erythritol airflow. MATERIALS AND METHODS: One hundred twenty (120) bovine dentin specimens were used in this study. Specimens were divided into eight groups and treated as follows: groups 1 and 2: polished with 2000- and 4000-grit carborundum papers but not instrumented ('untreated'); groups 3 and 4: hand scaler; groups 5 and 6: ultrasonic instrumentation; groups 7 and 8: erythritol airflow. Samples from groups 1, 3, 5, and 7 then underwent a chemical challenge (5 x 2 min HCl [pH 2.7]), whereas samples from groups 2, 4, 6, and 8 were subjected to a chemomechanical challenge (5 x 2 min HCl [pH 2.7] + 2 min brushing). Surface roughness and substance loss were measured profilometrically. RESULTS: The least substance loss through chemomechanical challenge was noted after erythritol airflow treatment (4.65 ± 0.93 µm), followed by ultrasonic instrumentation (7.30 ± 1.42 µm) and the hand scaler (8.30 ± 1.38 µm); the last two (hand scaler and ultrasonic tip) did not differ statistically significantly. The highest roughness after chemomechanical challenge was observed on ultrasonically treated specimens (1.25 ± 0.85 µm), followed by hand-scaled specimens (0.24 ± 0.16 µm) and those subject to erythritol airflow (0.18 ± 0.09 µm); there was no statistically signficant difference between the latter two, but they both differed statistically significantly from the ultrasonically treated specimens. No statistically significant difference in substance loss through the chemical challenge was observed between specimens pretreated by the hand scaler (0.75 ± 0.15 µm), ultrasonic tip (0.65 ± 0.15 µm), and erythritol airflow (0.75 ± 0.15 µm). The chemical challenge smoothed the surfaces treated with the hand scaler, ultrasonic tip, and erythritol airflow. CONCLUSION: Dentin pretreatment with erythritol powder airflow resulted in a higher resistance to chemomechanical challenge than did dentin treated ultrasonically or with the hand scaler.

Enamel Matrix Derivatives as an Adjunct to Alveolar Ridge Preservation-A Systematic Review.

PURPOSE: To systematically assess the current evidence regarding the adjunctive application of enamel matrix derivatives (EMDs) during alveolar ridge preservation (ARP) following tooth extraction. METHODS: A comprehensive literature search was conducted in MEDLINE, Cochrane Library, PsycINFO, Web of Science, Google Scholar, and Scopus to identify relevant randomized controlled clinical trials (RCTs). The primary outcome parameters of this systematic review were histomorphometric and radiographic data; secondary outcomes were the feasibility of implant placement after ARP as well as patient-related outcomes such as postoperative discomfort. RESULTS: The search identified 436 eligible articles published from 2011 to 2022, but only five were ultimately included for data extraction (146 patients). Given the substantial heterogeneity among the included studies, no meta-analysis could be performed. The authors' qualitative analysis showed marginally improved outcomes regarding an increased percentage of new bone formation after tooth extraction and a reduction in postoperative discomfort. CONCLUSIONS: Given the potential value of EMDs in other fields of regenerative dentistry, more consideration should be given to EMDs as an adjunctive treatment option in ARP. However, more well-controlled randomized clinical trials are necessary to evaluate the exact potential and impacts of EMDs.

Cleaning potential of interdental brushes around orthodontic brackets - an in vitro investigation.

This study evaluated the brushing efficacy of different interdental brushes around a multibracket appliance in vitro. In four models displaying misaligned and aligned teeth with and without attachment loss, the brushing capacities of three interdental brushes (IDB) were tested: A waist-shaped IDB with a diameter of 9 mm at both ends and 5 mm in the middle (B1), a cylindrical brush with a diameter of 9 mm (B2) and one with 5 mm (B3). Before cleaning, the black teeth in the respective models were stained white with titanium (IV) oxide and the percentage of cleaned surface was planimetrically assessed. In addition, the forces applied to the IDB were also recorded. The effect of brush and model on expected cleaning performance was examined using an analysis of variance (ANOVA). The cleaning performance of the brushes in decreasing order was B2>B3>B1; no significant differences between the different tooth areas and models were found. With regard to force measurements, significant differences were found with the highest and lowest forces IDB (2) and (1), respectively. There was a significant correlation between force and cleaning performance: The higher the force needed the higher was the cleaning performance. In summary, this study showed that cylindrical interdental brushes achieved a better cleaning performance than the waist-shaped IDB. Given some shortcomings of this first laboratory study, more research is still needed, but IDB may represent a valuable yet still clinically underused tools.

Microbial Sampling Using Interdental Brushes and Paper Points around Teeth and Implants: A Pilot Study for Comparison.

Inflammatory periodontal and peri-implant diseases follow dysbiotic shifts in a susceptible host. A well-established tool for microbial sample collection is the use of paper points. The purpose of this pilot study was to evaluate the use of interdental brushes compared to paper points. Biofilm samples were collected with paper points and later interdental brushes from ten patients. Five patients were represented with a community periodontal index of treatment needs (CPITN) of 0-2 around the teeth and an implant with PPD ≤ 5 mm and no radiological bone loss. The remaining five patients had a CPITN ≥ 3 and one implant with peri-implantitis. Microbial samples were analyzed with quantitative polymerase chain reaction (qPCR) and next-generation sequencing (NGS). The results showed higher amounts of DNA in samples taken by interdental brushes but also higher Ct values. Both methods detected Filifactor alocis, Porphyromonas gingivalis, Prevotella intermedia, Tannerella forsythia, and Treponema denticola in the majority of samples, while Aggregatibacter actinomycetemcomitans was rarely found. A microbial dysbiosis index showed comparable or higher values in sites with no periodontitis/peri-implantitis with interdental brushes. The results of this pilot study indicate that interdental brushes might be a valid technique for microbial sampling and particularly advantageous in the early detection of dysbiotic shifts around teeth and implants. Larger studies with more participants are needed to validate the proposed microbial sampling method with interdental brushes.

Nonsurgical cleaning potential of deep-threaded implants and titanium particle release: A novel in vitro tissue model.

OBJECTIVES: To measure the efficiency of three cleaning modalities on two implant designs with similar diameters but different thread depths as well as the presence of titanium particles. METHODS: Sixty dyed implants (30 × 4.8 apically tapered (ATAP) and 30 × 5.0 fully tapered (FTAP)) were fixed in plastic models. The horizontal bone defects were surrounded with porcine soft tissue. Three instrumentation modalities were used to clean for 150 s: Curette (CUR), ultrasonic scaler (US), and air powder waterjet device (APWJ) with erythritol powder. Afterward, implants were photographed and scanning electron microscopic (SEM) images were taken. Titanium in the soft tissues was quantified in dissolved samples and histologically confirmed. RESULTS: For ATAP and FTAP implants, the percentage of the cleaned surface was 26.4 ± 3.0 and 17.1 ± 2.4% for CUR, 33.7 ± 3.8% and 28.1 ± 2.3% for US, and 45.5 ± 4.1% and 24.7 ± 3.8% for APWJ, respectively. SEM images showed significant implant surface changes, especially after instrumentation with CUR and US, whereas APWJ had little to no effect. Most titanium residues were found after cleaning ATAP implants with CUR (152.0 ± 75.5), followed by US (89.5 ± 73.8) and APWJ (0.3 ± 0.8). For the FTAP implants, respective values accounted for 129.5 ± 58.6 µg and 67.0 ± 14.4 µg for CUR and US, respectively. No titanium residues were detected on ATAP with APWJ. CONCLUSION: Based on in vitro data, erythritol-powered APWJ still appears to be the most efficient and gentle cleaning method. All three instruments, however, were found to have unprocessed areas depending on different implant designs, hence, clinical relevance for non-surgical approaches remains challenging and warrants further improvement.

Gingival epitheses: forgotten craft or technology with a future? - Case report of a epithesis fabricated with CAD/CAM.

The case in this report presents an alternative, partially CAD/CAM-based fabrication of a gingival epithesis in a 48-years-old female patient. The patient suffered from a periodontits stage III, grade C. After a non-surgical periodontal treatment with adjunctive systemic antibiotics, the patient developed severe circumferential gingival recessions on the upper frontal teeth. Due to social discomfort and esthetic concerns, the indication for a gingival epithesis was made. After taking a conventional impression from the upper jaw, the cast model was scanned and the gingival epithesis was designed virtually at the laboratory. The epithesis was then milled from a block of high performance polymer. Minor adjustments of surface details were added manually. The result was a esthetically sufficient and by the patient well-accepted treatment modality. Further research is necessary to prove the feasibility of a full digital workflow and the long-term stability of CAD/CAMbased gingival epitheses.

Inflammatory stimulation of osteoblasts and keratinocytes from a SAPHO patient for implant risk evaluation.

The present report exemplifies a translational method, which could assist the clinical preevaluation of patients at risk before surgical interventions. In this study, a presurgical implant decision in a case of SAPHO (synovitis, acne, palmoplantar pustulosis, hyperostosis, osteitis) is described. Since the etiology of this syndrome is likely to involve genetic, infectious and immunological components, lipopolysaccharides (LPS) may conceptually trigger cytokine production leading to a specific chronic inflammation and immunological host response. This may hamper proper healing or accentuate the destruction of periodontal host tissues. In our approach, we examined the ex vivo cell viability and immune responses of primary osteoblasts and keratinocytes under sterile inflammation induced by P. gingivalis LPS. Keratinocytes and osteoblasts were obtained from biopsies of the keratinized gingiva and alveolar bone tissues of a SAPHO human subject. Enzymatically dissociated cells were thus cultured and incubated to LPS at different concentrations (50ng/ml, 200ng/ml, 500ng/ml and 1µg/ml) for 24 h in order to test inflammatory cytokine response (quantitative real time PCR) and toxicity (cell viability). Healthy primary keratinocytes and osteoblasts were used as control cells. The highest concentration of LPS (1µg/ml) significantly reduced cell viability (p < 0.05). Meanwhile, all tested LPS concentrations similarly enhanced the mRNA expressions of selected inflammatory cytokines (TNFα, IL-6, IL-8, IL-1ß and IL-1𝛼) up to ≈3.5-fold, when compared to the healthy cell controls (p < 0.05). This study demonstrated a valuable inflammatory risk evaluation before implant placement, which was successfully performed based on the presented laboratory diagnostic/prognostic approach.Sapho.

Soft tissue-related complications around anterior implants: commentary and clinical checklist.

Implant-based rehabilitation is a clinical challenge, especially in the esthetic area. Numerous factors influence the outcome of the rehabilitation; however, the two main factors are the bone and soft-tissue deficiencies at the intended implant site. Peri-implant soft tissue complications can arise from a combination of factors that can be summarized as two categories: diagnostic errors and surgical planning management errors. Most of the complications can be corrected after each step of the treatment and even after the delivery of the prosthetic restoration with adequate soft tissue management in order to give the patient an esthetically pleasing outcome. The aims of this article were: to present the current literature, to propose a clinical checklist to guide clinicians in evaluating the prognosis of the treatment utilizing soft tissue grafting, and to illustrate a case series partially employing the proposed clinical checklist. The proposed checklist could be helpful in evaluating the prognosis of the treatment utilizing only soft tissue grafting. In clinical cases in which the prognosis is classified as good, soft tissue management could be a viable treatment option before attempting more radical procedures like implant removal.

Bone envelope for implant placement after alveolar ridge preservation: a systematic review and meta-analysis.

PURPOSE: To assess the dimensional establishment of a bony envelope after alveolar ridge preservation (ARP) with deproteinized bovine bone mineral (DBBM) in order to estimate the surgical feasibility of standard diameter implants placement without any additional augmentation methods. METHODS: PubMed, Embase and CENTRAL databases were searched for suitable titles and abstracts using PICO elements. Inclusion criteria were as follows: randomized controlled trials (RCTs) comprising at least ten systemically healthy patients; test groups comprised placement of (collagenated) DBBM w/o membrane and control groups of no grafting, respectively. Selected abstracts were checked regarding their suitability, followed by full-text screening and subsequent statistical data analysis. Probabilities and number needed to treat (NNT) for implant placement without any further need of bone graft were calculated. RESULTS: The initial database search identified 2583 studies. Finally, nine studies with a total of 177 implants placed after ARP with DBBM and 130 implants after SH were included for the quantitative and qualitative evaluation. A mean difference of 1.13 mm in ridge width in favour of ARP with DBBM could be calculated throughout all included studies (95% CI 0.28-1.98, t2 = 1-1063, I2 = 68.0%, p < 0.01). Probabilities for implant placement with 2 mm surrounding bone requiring theoretically no further bone augmentation ranged from 6 to 19% depending on implant diameter (3.25: 19%, RD = 0.19, C = 0.06-0.32, p < 0.01/4.0: 14%, RD = 0.14, C = 0.05-0.23, p < 0.01/5.0: 6%, RD = 0.06, C = 0.00-0.12, p = 0.06). CONCLUSION: ARP employing DBBM reduces ridge shrinkage on average by 1.13 mm and improves the possibility to place standard diameter implants with up to 2 mm circumferential bone housing; however, no ARP would have been necessary or additional augmentative bone interventions are still required in 4 out of 5 cases.

Radiographic results of osteotome-driven maxillary sinus floor elevation without grafting materials after 17.5 years radiographic evaluation of minimally-invasive sinus grafting.

BACKGROUND: There is growing evidence that minimally invasive sinus augmentation works without the use of filler materials. This study assessed the bone integration and sinus projection of single-unit implants in the maxilla, which were placed approximately 18 years ago using a modified filler-free osteotome technique. METHODS: Sixteen of the 24 treated patients of a former publication (treatment was performed between 2001 and 2004) were reassessed after a mean implant loading period of 17.5 years. The treated posterior areas were evaluated using cone-beam computed tomography (CBCT), and as a primary outcome parameter, sinus projection was determined in sectional views at the mesial, distal, buccal, and oral sites. Additionally, the percentage of alveolar bone contact was determined with respect to the implant length. Conventional radiographs were used to determine marginal bone levels. Additionally, plaque, bleeding on probing, and probing pocket depth were measured. The reconstructions were checked for chipping and other technical complications such as loss of retention, screw loosening, and screw fracture. RESULTS: The mean age of the included patients was 72.8 ± 8.5 years. Two implants were lost. Therefore, fourteen implants were available for CBCT evaluation. The highest sinus projection of 2.1 ± 1.7 mm was observed in the distal aspect, while it was 1.1 ± 1.5, 0.9 ± 1.2, and 0.9 ± 1.1 mm at the mesial, buccal, and oral sites, respectively. The maximal sinus projection in one case was 6.7 mm. The percentage calculation of osseous implant integration (in mm ± standard deviations) with respect to the selected implant length at the mesial, distal, buccal, and oral sites showed values ranging from, 87.9 ± 16.0, 78.4 ± 20.3, 91.0 ± 12.5, and 90.5 ± 11.1%, respectively. Five implants displayed probing pocket depths of more than 4 mm with bleeding; all implants had less than 1 mm of bone loss in the observation period, that is, implants had mucositis. Six of 14 crowns showed small chippings within the ceramic veneering. One case of screw loosening was reported in medical history. DISCUSSION: This study showed that implant placement in non-augmented sinuses resulted in good clinical results. The sinus projection, even if persistent and present, leads to no functional impairments. Given adequate maintenance, marginal bone levels remain constant and peri­implant health can be observed. Moreover, these results represent only a small cohort; and therefore, should be interpreted with caution. However, in view of the existing literature, these highly promising results are in line with other findings. CLINICAL SIGNIFICANCE: To the best of our knowledge, this dataset is the report with the longest follow-up. Overall, implants placed in the sinus without fillers represent a valuable alternative for tooth replacement in a minimally interventional manner.